dmesg - ocz test
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.35-32-generic-pae (buildd@zirconium) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5.1) ) #68-Ubuntu SMP Tue Mar 27 18:04:42 UTC 2012 (Ubuntu 2.6.35-32.68-generic-pae 2.6.35.14)
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cbfb0000 (usable)
BIOS-e820: 00000000cbfb0000 - 00000000cbfc0000 (ACPI data)
BIOS-e820: 00000000cbfc0000 - 00000000cbff0000 (ACPI NVS)
BIOS-e820: 00000000cbff0000 - 00000000cc000000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS!
NX (Execute Disable) protection: approximated by x86 segment limits
DMI present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0xcbfb0 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-EFFFF write-through
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0C0000000 mask FF8000000 write-back
3 base 0C8000000 mask FFC000000 write-back
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009f800 (usable)
modified: 000000000009f800 - 00000000000a0000 (reserved)
modified: 00000000000e6000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 00000000cbfb0000 (usable)
modified: 00000000cbfb0000 - 00000000cbfc0000 (ACPI data)
modified: 00000000cbfc0000 - 00000000cbff0000 (ACPI NVS)
modified: 00000000cbff0000 - 00000000cc000000 (reserved)
modified: 00000000fed00000 - 00000000fed00400 (reserved)
modified: 00000000fee00000 - 00000000fee01000 (reserved)
modified: 00000000ff380000 - 0000000100000000 (reserved)
initial memory mapped : 0 - 00e00000
found SMP MP-table at [c00ff780] ff780
init_memory_mapping: 0000000000000000-0000000037bfe000
0000000000 - 0000200000 page 4k
0000200000 - 0037a00000 page 2M
0037a00000 - 0037bfe000 page 4k
kernel direct mapping tables up to 37bfe000 @ 15000-1a000
RAMDISK: 375a8000 - 37ff0000
Allocated new RAMDISK: 00a08000 - 0144ff29
Move RAMDISK from 00000000375a8000 - 0000000037feff28 to 00a08000 - 0144ff28
ACPI: RSDP 000fa010 00014 (v00 ACPIAM)
ACPI: RSDT cbfb0000 00040 (v01 052011 RSDT1536 20110520 MSFT 00000097)
ACPI: FACP cbfb0200 00084 (v01 A M I OEMFACP 12000601 MSFT 00000097)
ACPI: DSDT cbfb0440 05641 (v01 AS166 AS166172 00000172 INTL 20051117)
ACPI: FACS cbfc0000 00040
ACPI: APIC cbfb0390 0006C (v01 052011 APIC1536 20110520 MSFT 00000097)
ACPI: MCFG cbfb0400 0003C (v01 052011 OEMMCFG 20110520 MSFT 00000097)
ACPI: OEMB cbfc0040 00071 (v01 052011 OEMB1536 20110520 MSFT 00000097)
ACPI: AAFT cbfb5a90 00027 (v01 052011 OEMAAFT 20110520 MSFT 00000097)
ACPI: GSCI cbfc00c0 02024 (v01 052011 GMCHSCI 20110520 MSFT 00000097)
ACPI: SSDT cbfc2a10 00A7C (v01 DpgPmm CpuPm 00000012 INTL 20051117)
ACPI: Local APIC address 0xfee00000
2371MB HIGHMEM available.
891MB LOWMEM available.
mapped low ram: 0 - 37bfe000
low ram: 0 - 37bfe000
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x00037bfe
HighMem 0x00037bfe -> 0x000cbfb0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000cbfb0
On node 0 totalpages: 835391
free_area_init_node: node 0, pgdat c0842d40, node_mem_map c1451200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1752 pages used for memmap
Normal zone: 222502 pages, LIFO batch:31
HighMem zone: 4744 pages used for memmap
HighMem zone: 602410 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
early_res array is doubled to 64 at [16000 - 167ff]
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
Allocating PCI resources starting at cc000000 (gap: cc000000:32d00000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 15 pages/cpu @c2e00000 s39872 r0 d21568 u524288
pcpu-alloc: s39872 r0 d21568 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 828863
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
allocated 16709760 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Subtract (50 early reservations)
#1 [0000001000 - 0000002000] EX TRAMPOLINE
#2 [0000100000 - 00009ff69c] TEXT DATA BSS
#3 [0000a00000 - 0000a0712f] BRK
#4 [00000ff790 - 0000100000] BIOS reserved
#5 [00000ff780 - 00000ff790] MP-table mpf
#6 [000009f800 - 00000fca90] BIOS reserved
#7 [00000fcbfc - 00000ff780] BIOS reserved
#8 [00000fca90 - 00000fcbfc] MP-table mpc
#9 [0000010000 - 0000011000] TRAMPOLINE
#10 [0000011000 - 0000015000] ACPI WAKEUP
#11 [0000015000 - 0000016000] PGTABLE
#12 [0000a08000 - 0001450000] NEW RAMDISK
#13 [0001450000 - 0001451000] BOOTMEM
#14 [0001451000 - 0002dd1000] BOOTMEM
#15 [0002dd1000 - 0002dd1004] BOOTMEM
#16 [0002dd1040 - 0002dd1100] BOOTMEM
#17 [0002dd1100 - 0002dd11a8] BOOTMEM
#18 [0002dd11c0 - 0002dd41c0] BOOTMEM
#19 [0002dd41c0 - 0002dd4380] BOOTMEM
#20 [0002dd4380 - 0002de0380] BOOTMEM
#21 [0002de0380 - 0002de03af] BOOTMEM
#22 [0002de03c0 - 0002de054c] BOOTMEM
#23 [0002de0580 - 0002de05c0] BOOTMEM
#24 [0002de05c0 - 0002de0600] BOOTMEM
#25 [0002de0600 - 0002de0640] BOOTMEM
#26 [0002de0640 - 0002de0680] BOOTMEM
#27 [0002de0680 - 0002de06c0] BOOTMEM
#28 [0002de06c0 - 0002de0700] BOOTMEM
#29 [0002de0700 - 0002de0740] BOOTMEM
#30 [0002de0740 - 0002de0780] BOOTMEM
#31 [0002de0780 - 0002de07c0] BOOTMEM
#32 [0002de07c0 - 0002de0800] BOOTMEM
#33 [0002de0800 - 0002de0810] BOOTMEM
#34 [0002de0840 - 0002de08ae] BOOTMEM
#35 [0002de08c0 - 0002de092e] BOOTMEM
#36 [0002e00000 - 0002e0f000] BOOTMEM
#37 [0002e80000 - 0002e8f000] BOOTMEM
#38 [0002f00000 - 0002f0f000] BOOTMEM
#39 [0002f80000 - 0002f8f000] BOOTMEM
#40 [0002de2940 - 0002de2944] BOOTMEM
#41 [0002de2980 - 0002de2984] BOOTMEM
#42 [0002de29c0 - 0002de29d0] BOOTMEM
#43 [0002de2a00 - 0002de2a10] BOOTMEM
#44 [0002de2a40 - 0002de2ad8] BOOTMEM
#45 [0002de2b00 - 0002de2b38] BOOTMEM
#46 [0002de2b40 - 0002de6b40] BOOTMEM
#47 [0002f8f000 - 000300f000] BOOTMEM
#48 [0002e0f000 - 0002e4f000] BOOTMEM
#49 [000300f000 - 0003ffe880] BOOTMEM
Initializing HighMem for node 0 (00037bfe:000cbfb0)
Memory: 3278236k/3342016k available (5101k kernel code, 63328k reserved, 2433k data, 708k init, 2428616k highmem)
virtual kernel memory layout:
fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc085c000 - 0xc090d000 ( 708 kB)
.data : 0xc05fb50a - 0xc085b988 (2433 kB)
.text : 0xc0100000 - 0xc05fb50a (5101 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:2304 nr_irqs:712
Console: colour VGA+ 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 2659.947 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5319.89 BogoMIPS (lpj=10639788)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
ACPI: Core revision 20100428
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 22422 entries in 44 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU E8200 @ 2.66GHz stepping 06
APIC calibration not consistent with PM-Timer: 136ms instead of 100ms
APIC delta adjusted to PM-Timer: 2078123 (2826420)
Booting Node 0, Processors #1
Initializing CPU#1
Brought up 2 CPUs
Total of 2 processors activated (10639.87 BogoMIPS).
devtmpfs: initialized
regulator: core version 0.5
Time: 10:58:29 Date: 07/18/12
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
EISA bus registered
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT cbfc20f0 00235 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00235 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
ACPI: SSDT cbfc2580 00235 (v01 DpgPmm P002Ist 00000012 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00235 (v01 DpgPmm P002Ist 00000012 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0xcc000000-0xdfffffff]
pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xffffffff]
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xfe8fc000-0xfe8fffff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1d.0: reg 20: [io 0xc480-0xc49f]
pci 0000:00:1d.1: reg 20: [io 0xc800-0xc81f]
pci 0000:00:1d.2: reg 20: [io 0xc880-0xc89f]
pci 0000:00:1d.3: reg 20: [io 0xcc00-0xcc1f]
pci 0000:00:1d.7: reg 10: [mem 0xfe8fbc00-0xfe8fbfff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0280 (mask 00ff)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0300 (mask 003f)
pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 18: [io 0x08f0-0x08f7]
pci 0000:00:1f.1: reg 1c: [io 0x08f8-0x08fb]
pci 0000:00:1f.1: reg 20: [io 0xffa0-0xffaf]
pci 0000:00:1f.2: reg 10: [io 0xc400-0xc407]
pci 0000:00:1f.2: reg 14: [io 0xc080-0xc083]
pci 0000:00:1f.2: reg 18: [io 0xc000-0xc007]
pci 0000:00:1f.2: reg 1c: [io 0xbc00-0xbc03]
pci 0000:00:1f.2: reg 20: [io 0xb880-0xb88f]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
pci 0000:04:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:04:00.0: reg 18: [mem 0xfebe0000-0xfebeffff 64bit]
pci 0000:04:00.0: reg 20: [io 0xe000-0xe0ff]
pci 0000:04:00.0: reg 30: [mem 0xfebc0000-0xfebdffff pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.1: reg 10: [mem 0xfebfc000-0xfebfffff 64bit]
pci 0000:04:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 04-04]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: reg 10: [mem 0xfeafe000-0xfeafffff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:01:00.0: reg 10: [io 0xd800-0xd8ff]
pci 0000:01:00.0: reg 18: [mem 0xcffff000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 20: [mem 0xcfff8000-0xcfffbfff 64bit pref]
pci 0000:01:00.0: reg 30: [mem 0xfe9e0000-0xfe9fffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:00:1c.1: PCI bridge to [bus 01-01]
pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.1: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:1c.1: bridge window [mem 0xcff00000-0xcfffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xcc000000-0xdfffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xffffffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
HEST: Table is not found!
vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: WMI: Mapper loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009f800 - 000000000009ffff
reserve RAM buffer: 00000000cbfb0000 - 00000000cbffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: [io 0x0800-0x087f] has been reserved
system 00:07: [io 0x0480-0x04bf] has been reserved
system 00:07: [io 0x0900-0x090f] has been reserved
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:09: [mem 0xffc00000-0xfff7ffff] has been reserved
system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0c: [io 0x0280-0x028f] has been reserved
system 00:0c: [io 0x0290-0x029f] has been reserved
system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0e: [mem 0x00100000-0xcbffffff] could not be reserved
pci 0000:00:1c.0: BAR 15: assigned [mem 0xcc000000-0xcc1fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:01.0: PCI bridge to [bus 04-04]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:1c.0: bridge window [mem 0xcc000000-0xcc1fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 01-01]
pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.1: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:1c.1: bridge window [mem 0xcff00000-0xcfffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 03-03]
pci 0000:00:1e.0: bridge window [io disabled]
pci 0000:00:1e.0: bridge window [mem disabled]
pci 0000:00:1e.0: bridge window [mem pref disabled]
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: enabling device (0106 -> 0107)
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xcc000000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xffffffff]
pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:04: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:02: resource 2 [mem 0xcc000000-0xcc1fffff 64bit pref]
pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:01: resource 2 [mem 0xcff00000-0xcfffffff 64bit pref]
pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:03: resource 8 [mem 0xcc000000-0xdfffffff]
pci_bus 0000:03: resource 9 [mem 0xf0000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:04:00.0: Boot video device
PCI: CLS 32 bytes, default 64
cpufreq-nforce2: No nForce2 chipset.
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1342609109.248:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.14)
msgmni has been set to 1659
Freeing initrd memory: 10528k freed
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 40 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 41 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.1: setting latency timer to 64
alloc irq_desc for 42 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Firmware did not grant requested _OSC control
Firmware did not grant requested _OSC control
Firmware did not grant requested _OSC control
Firmware did not grant requested _OSC control
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x22220
intel_idle: does not run on family 6 model 23
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
ERST: Table is not found!
isapnp: Scanning for PnP cards...
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.1: version 2.13
alloc irq_desc for 18 on node -1
alloc kstat_irqs on node -1
ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
alloc irq_desc for 19 on node -1
alloc kstat_irqs on node -1
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xb880 irq 19
ata4: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb888 irq 19
Fixed MDIO Bus: probed
PPP generic driver version 2.4.2
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: using broken periodic workaround
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe8fbc00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c480
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c800
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c880
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000cc00
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: [email protected]
device-mapper: multipath: version 1.1.1 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
EISA: Probing bus 0 at eisa.0
EISA: Cannot allocate resource for mainboard
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
Cannot allocate resource for EISA slot 3
Cannot allocate resource for EISA slot 4
Cannot allocate resource for EISA slot 5
Cannot allocate resource for EISA slot 6
Cannot allocate resource for EISA slot 7
Cannot allocate resource for EISA slot 8
EISA: Detected 0 cards.
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Using IPI No-Shortcut mode
PM: Resume from disk failed.
registered taskstats version 1
Magic number: 4:859:982
rtc_cmos 00:03: setting system clock to 2012-07-18 10:58:30 UTC (1342609110)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ata4.00: ATA-8: OCZ-AGILITY3, 2.15, max UDMA/133
ata4.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata4.00: configured for UDMA/133
ata3.00: ATAPI: TSSTcorp CDDVDW SH-S223B, SB00, max UDMA/100
ata3.01: ATA-8: ST31000520AS, CC32, max UDMA/133
ata3.01: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/100
ata3.01: configured for UDMA/133
isapnp: No Plug & Play device found
scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223B SB00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg0 type 5
scsi 2:0:1:0: Direct-Access ATA ST31000520AS CC32 PQ: 0 ANSI: 5
sd 2:0:1:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 2:0:1:0: Attached scsi generic sg1 type 0
sd 2:0:1:0: [sda] Write Protect is off
sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 3:0:0:0: Direct-Access ATA OCZ-AGILITY3 2.15 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 3:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:
sdb: sda1 sda2 < sdb1 sdb2 < sdb5 >
sd 3:0:0:0: [sdb] Attached SCSI disk
usb 1-1: new high speed USB device using ehci_hcd and address 2
sda5 >
sd 2:0:1:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 708k freed
Write protecting the kernel text: 5104k
Write protecting the kernel read-only data: 2016k
udev[82]: starting version 163
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:01:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
r8169 0000:01:00.0: setting latency timer to 64
alloc irq_desc for 43 on node -1
alloc kstat_irqs on node -1
r8169 0000:01:00.0: irq 43 for MSI/MSI-X
r8169 0000:01:00.0: eth0: RTL8168d/8111d at 0xf8490000, 00:19:66:c2:02:12, XID 081000c0 IRQ 43
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
xhci_hcd 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
xhci_hcd 0000:02:00.0: setting latency timer to 64
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 6
xhci_hcd 0000:02:00.0: irq 16, io mem 0xfeafe000
usb usb6: No SuperSpeed endpoint companion for config 1 interface 0 altsetting 0 ep 129: using minimum values
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
usb 1-4: new high speed USB device using ehci_hcd and address 4
usb 3-1: new low speed USB device using uhci_hcd and address 2
usb 6-2: new SuperSpeed USB device using xhci_hcd and address 2
xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
udev[352]: starting version 163
intel_rng: FWH not detected
Linux agpgart interface v0.103
leds_ss4200: no LED devices found
lp: driver loaded but no devices found
Initializing USB Mass Storage driver...
[drm] Initialized drm 1.1.0 20060810
parport_pc 00:06: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
w83627ehf: Found W83627EHG chip at 0x290
scsi4 : usb-storage 1-4:1.0
usbcore: registered new interface driver hiddev
scsi5 : usb-storage 6-2:1.0
ppdev: user-space parallel port driver
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
input: 2.4G Receiver as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input2
generic-usb 0003:1D57:32DA.0001: input,hidraw0: USB HID v1.10 Keyboard [2.4G Receiver] on usb-0000:00:1d.1-1/input0
input: 2.4G Receiver as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/input/input3
generic-usb 0003:1D57:32DA.0002: input,hidraw1: USB HID v1.10 Mouse [2.4G Receiver] on usb-0000:00:1d.1-1/input1
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
radeon 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
radeon 0000:04:00.0: setting latency timer to 64
[drm] initializing kernel modesetting (RV730 0x1002:0x9498).
[drm] register mmio base: 0xFEBE0000
[drm] register mmio size: 65536
ATOM BIOS: 9498.11.15.0.8.AS02
[drm] Clocks initialized !
radeon 0000:04:00.0: VRAM: 1024M 0x00000000 - 0x3FFFFFFF (1024M used)
radeon 0000:04:00.0: GTT: 512M 0x40000000 - 0x5FFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 430428 kiB.
[TTM] Zone highmem: Available graphics memory: 1644736 kiB.
[TTM] Initializing pool allocator.
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
alloc irq_desc for 44 on node -1
alloc kstat_irqs on node -1
radeon 0000:04:00.0: irq 44 for MSI/MSI-X
radeon 0000:04:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading RV730 Microcode
input: 2.4G Receiver as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.2/input/input4
generic-usb 0003:1D57:32DA.0003: input,hidraw2: USB HID v1.10 Device [2.4G Receiver] on usb-0000:00:1d.1-1/input2
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
lp0: using parport0 (interrupt-driven).
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
alloc irq_desc for 45 on node -1
alloc kstat_irqs on node -1
HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
type=1400 audit(1342598315.682:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=636 comm="apparmor_parser"
type=1400 audit(1342598315.682:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=655 comm="apparmor_parser"
type=1400 audit(1342598315.682:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=636 comm="apparmor_parser"
type=1400 audit(1342598315.682:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=655 comm="apparmor_parser"
type=1400 audit(1342598315.682:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=636 comm="apparmor_parser"
type=1400 audit(1342598315.682:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=655 comm="apparmor_parser"
Adding 4805628k swap on /dev/sdb5. Priority:-1 extents:1 across:4805628k SS
EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
[drm] ring test succeeded in 1 usecs
[drm] radeon: ib pool ready.
[drm] ib test succeeded in 0 usecs
[drm] Enabling audio support
failed to evaluate ATIF got AE_BAD_PARAMETER
radeon 0000:04:00.0: Error during ACPI methods call
[drm] Default TV standard: NTSC
[drm] Default TV standard: NTSC
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] HDMI-A
[drm] HPD2
[drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY1
[drm] Connector 1:
[drm] VGA
[drm] DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c
[drm] Encoders:
[drm] CRT2: INTERNAL_KLDSCP_DAC2
[drm] Connector 2:
[drm] DVI-I
[drm] HPD1
[drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] DFP1: INTERNAL_UNIPHY
r8169 0000:01:00.0: eth0: link up
r8169 0000:01:00.0: eth0: link up
[drm] Internal thermal controller without fan control
[drm] radeon: power management initialized
type=1400 audit(1342598316.134:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=946 comm="apparmor_parser"
type=1400 audit(1342598316.134:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=946 comm="apparmor_parser"
type=1400 audit(1342598316.134:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=946 comm="apparmor_parser"
type=1400 audit(1342598316.138:11): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=945 comm="apparmor_parser"
scsi 4:0:0:0: Direct-Access WD 7500AAC External 1.65 PQ: 0 ANSI: 4
sd 4:0:0:0: Attached scsi generic sg3 type 0
sd 4:0:0:0: [sdc] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 21 00 00 00
sd 4:0:0:0: [sdc] Assuming drive cache: write through
sd 4:0:0:0: [sdc] Assuming drive cache: write through
sdc:
scsi 5:0:0:0: Direct-Access WD My Passport 0730 1012 PQ: 0 ANSI: 6
scsi 5:0:0:1: Enclosure WD SES Device 1012 PQ: 0 ANSI: 6
sd 5:0:0:0: Attached scsi generic sg4 type 0
scsi 5:0:0:1: Attached scsi generic sg5 type 13
sd 5:0:0:0: [sdd] 1953458176 512-byte logical blocks: (1.00 TB/931 GiB)
sd 5:0:0:0: [sdd] Write Protect is off
sd 5:0:0:0: [sdd] Mode Sense: 47 00 10 08
sd 5:0:0:0: [sdd] Assuming drive cache: write through
sd 5:0:0:0: [sdd] Assuming drive cache: write through
sdd: sdd1
sd 5:0:0:0: [sdd] Assuming drive cache: write through
sd 5:0:0:0: [sdd] Attached SCSI disk
[drm] fb mappable at 0xD0142000
[drm] vram apper at 0xD0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
xhci_hcd 0000:02:00.0: WARN: Stalled endpoint
Console: switching to colour frame buffer device 240x67
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
Slow work thread pool: Starting up
Slow work thread pool: Ready
[drm] Initialized radeon 2.5.0 20080528 for 0000:04:00.0 on minor 0
HDA Intel 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
alloc irq_desc for 46 on node -1
alloc kstat_irqs on node -1
HDA Intel 0000:04:00.1: irq 46 for MSI/MSI-X
HDA Intel 0000:04:00.1: setting latency timer to 64
sdc1
sd 4:0:0:0: [sdc] Assuming drive cache: write through
sd 4:0:0:0: [sdc] Attached SCSI disk
ses 5:0:0:1: Attached Enclosure device
xhci_hcd 0000:02:00.0: WARN: Stalled endpoint
EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro,commit=0
EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro,commit=0
hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
eth0: no IPv6 routers present
usb 1-6: new high speed USB device using ehci_hcd and address 5
scsi6 : usb-storage 1-6:1.0
scsi 6:0:0:0: Direct-Access Kingston DataTraveler 120 1.00 PQ: 0 ANSI: 2
sd 6:0:0:0: Attached scsi generic sg6 type 0
sd 6:0:0:0: [sde] 31309760 512-byte logical blocks: (16.0 GB/14.9 GiB)
sd 6:0:0:0: [sde] Write Protect is off
sd 6:0:0:0: [sde] Mode Sense: 16 23 09 51
sd 6:0:0:0: [sde] Assuming drive cache: write through
sd 6:0:0:0: [sde] Assuming drive cache: write through
sde: sde1
sd 6:0:0:0: [sde] Assuming drive cache: write through
sd 6:0:0:0: [sde] Attached SCSI removable disk